Rhino Pro Carbon Filters


£59.95£309.95

Rhino Pro Carbon Filters

The Rhino Pro Carbon Filters are constructed from Australian-mined RC412 carbon, the best in the world. The carbon is tightly packed and sealed into a high-efficiency airflow cylinder with a vortex cone in the base and a custom pore surface for maximum transference. The high-porosity carbon and lightweight aluminum make the Rhino filter smaller and easier to handle.

How the Rhino Pro Carbon Filters Work

The Rhino Pro carbon filters work by either Pushing or Pulling air over a 50mm activated carbon bed, Activated Carbon is a charcoal that has a highly absorbent surface area. As the air is moved through the carbon filter the carbon grabs onto the odors and will make sure the air leaving your grow room is completely odorless.

  • 50mm bed of RC412 activated carbon.
  • Aluminum tops and bases for reduced weight.
  • Sizes from 4″ – 12″
  • 51% open area custom mesh for greater air flow.
  • Machine packed carbon means more carbon and less movement.
  • Coned internal base for optimum air flow
  • Trusted by Growers Worldwide

How long will a Rhino Pro Filter last?

Unlike all other carbon filters that have an effective life span of 9 to 18 months, our filters have always been known to have an out lasting performance for well over two years and replacement carbon sleeves are available to make them last even longer.

Filter Size        Air Volume        Fan Type

100 x 300         350 m3/hr           4″ A1/L1 fan
125 x 300         500 m3/hr           5″ Al/L1 fan
150 x 300         600m3/hr            6″ A1 fan
150 x 600         900m3/hr            6″ L1 fan
200 x 400         800m3/hr            8″ A1 fan
200 x 600         1125m3/hr          8″ L1 fan
250 x 600         1420m3/hr          10″ A1/L1 fan
250 x 1000       1900m3/hr          10″ A1/L1 fan
315 x 600         2440m3/hr          12″ A1 / L1 fan
315 x 1000       3250m3/hr          12″ L1 fan

What is Contact Time?

Contact time is a measure of how long contaminated air needs to contact carbon for total removal of impurities. At an estimated 0.05 seconds, our carbon has one of the shortest contact times of any carbon available. All the factors discussed above contribute directly to this. This allows Rhino Filters to use less carbon than competitors and return massive reduction in overall filter weight with superior university proven results.

 

Size

4" ( 100 x 300 ) 350m3/hr, 5" ( 125 x 300 ) 500m3/hr, 6" ( 150 x 300 ) 600m3/hr, 6" ( 150 x 600 ) 900m3/hr, 8" ( 200 x 400 ) 800m3/hr, 8" ( 200 x 600 ) 1125m3/hr, 10" ( 250 x 600 ) 1420m3/hr, 10" ( 250 x 1000 ) 1900m3/hr, 12" ( 315 x 600 ) 2440m3/hr, 12" ( 315 x 1000 ) 3250m3/hr

You may also like…