Phresh Hyper Fan V2


Phresh Hyper Fan v2

The Phresh Hyper Fan V2 is designed to push or pull air through carbon filters, ducting and air-cooled lights.

The Phresh Hyperfan has extremely high pascal pressure outputs with up to 12% more push than the nearest competing mixed flow fan and up to 45% more than a standard centrifugal fan delivering the highest CFM’s per watt of any fan in the industry.

If your looking to increase your true airflow and dramatically reduce heat then the Hyperfan is for you.

The 12 stages digital motor (4 stages in most fans) efficiently drives the fan blades, whilst only using a fraction of the electricity of analogue/typical extractor fans. These may be slightly more expensive to buy (initial outlay) but the savings you will see on electricity in the first year alone more than makes up for this.

Smaller and quieter than the average fan, under 2kg and 150mm entire length (6 Inch Fan), these fans produce less heat, vibration, noise and as mentioned, use almost half the power of a standard fan.

Hyperfans produce a smooth, ultra-efficient and low vibration airflow. Other benefits include minimal wear/upkeep, improved reliability and a vastly better lifespan.

Hyper Fan Specifications.

6-Inch V2
Diameter: 150mm
Airflow: 535 m3/hr
Max watts: 42w
Peak amps: 0.3

8-Inch V2
Diameter: 200mm
Airflow: 1206 m3/hr
Max watts: 90w
Peak amps: 0.7

10-Inch V2
Diameter: 250mm
Airflow: 1810 m3/hr
Max watts: 180w
Peak amps: 1.2


SKU: ph-hf-uta150 Category: Tags: , ,

150mm, 200mm, 250mm

You may also like…